MS Coil Supplier Mumbai | Mild Steel Hot Rolled Coils | Aero Enterprises
Aero Enterprises supplies MS coils across India for slitting, cut-to-length work, sheet conversion, fabrication, and general engineering use. These hot rolled coils are used where regular supply, flexible processing, and practical base material are important.
Details of MS Coil Mild Steel Coils
MS coil mild steel hot rolled coil is the primary coil form from which most HR, CR, and fabricated sheet products are derived. At Aero Enterprises, we stock Quality mild steel coils in 0.5 to 6mm thickness ranges, 1.5 to 5 tonne rolls, and standard widths of 1220mm, 1250mm, 1500mm, and 2000mm where mill availability permits. MS coils are used by coil processors, sheet-conversion yards, and fabrictors who require continuous length material for slitting, strip cutting, sheet production, stamping, bending, and welding. They are fed directly into high-volume Power Press Stamping and continuous Shearing & Blanking production lines. The coils are sourced for grade traceable structural and fabrication work.
“MS coils for slitting, cut-to-length, sheet conversion, fabrication, and general industrial production.”
What Is an MS Coil
An MS coil is a continuous hot-rolled mild steel strip wound on a core, manufactured in wide widths and supplied in tonnage coils rather than cut sheets. The term 'mild steel' refers to low-carbon steel with good formability, weldability, and machinability, while the term 'coil' indicates the product form. MS coils are used as the input material for slitting lines, sheet-conversion plants, and direct fabrication-by-coil, where the coil is fed into a press line, straightened, cut to length, and formed into finished parts. Grade Commercial Quality is the most common mild steel coil grade in India, providing 250 MPa minimum yield strength and 410 MPa minimum tensile strength for general fabrication and structural use. E250BR and E350 grades are used where higher strength or as-rolled structural properties are required. MS coils at Aero Enterprises are supplied in 0.5 to 6.0mm thickness range and 1.5 to 5 tonne roll weights, suitable for both small-scale and large-scale fabrication workflows.
MS Coil Mild Steel Coils Weight Calculator
Verified sheet thickness and estimated mass data for procurement billing calculations.
MS Coil Uses and Applications
Recommended industrial use cases and fabrication applications for MS Coil Mild Steel Coils.
MS Coil vs HR Sheet vs CR Coil When to Use Which
MS coil is hot-rolled mild steel in continuous strip form the base input for tube mills, roll-forming lines, and sheet conversion. HR sheet is the same material cut to 8x4 ft for fabrication workshops that process individual sheets. CR coil is cold-rolled from MS coil tighter tolerance (±0.05mm), smoother surface, higher cost. Choose MS coil for high-volume continuous fabrication and sheet conversion. Choose HR sheet when you need cut-to-size material for direct fabrication. Choose CR coil for precision-stamped visible components where surface and tolerance matter.
HSN Code of MS Coil Mild Steel Coils
Mild steel coils (hot-rolled) are classified under HSN Code 7208 (flat-rolled products of iron or non-alloy steel, hot-rolled, of a width of 600mm or more). GST rate is 18% on all MS coil products. Aero Enterprises invoices for MS coils include correct HSN 7208 and GSTIN 27AGCPK5633K1Z9. No Test Certificates (No TC) are available on request for Commercial Quality-traceable structural and fabrication projects.
Related Sheet Metals
What Our Client says about MS Coil Mild Steel Coils
FAQ of
MS Coil Mild Steel Coils
Aero Enterprises believe in keeping things clear and simple. Read through our common questions to understand our supply capabilities, standards, and procurement processes for MS Coil Mild Steel Coils.